ASE C band light source specification
www.acfiber.com  
NO. 1 Service NO.1 Quality  
ASE C-Band light Source  
Applications:  
Optical fiber sensing  
Optical fiber passive component spectrum testing  
Optical fiber grating, DWDM, filter testing  
Optical fiber measurement equipments  
Features:  
High output power  
High stability  
Broadband spectrum output, covering  
Specifications:  
Parameters  
ASE-C  
GFF  
//  
GFF  
1526 ～1565  
10.0 ～23.0  
Operating wavelength (nm)  
Output power (dBm)  
1527~1566  
7.0~17.0  
mar  
k
et@acfiber.com  
www.acfiber.com  
www.acfiber.com  
NO. 1 Service NO.1 Quality  
-20 ～-2  
Spectral density (dBm/nm)  
Spectral stability (dBm/nm)  
Output power short-term stability (dB)  
Output power long-term stability (dB)  
Pigtail fiber  
≤±0.005(5 min)  
≤±0.005 (5 min)  
≤±0.01 (8 hour)  
SMF-28  
Connector type  
FC/PC, FC/UPC or FC/APC  
Operating temperature (℃)  
0 ～+65 (-20 ～+65 available)  
Storage temperature (℃)  
-20 ～+70  
20～80  
Relative humidity (%)  
110/220V AC,+5V or +3.3V DC;>500mA; △V＜1%  
Power Supply  
Maximal Power Consumption  
10W  
Dimensions (L×W×H mm)  
90×70×19, 320×220×90  
Remark：Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.  
1. Test condition: fixed temperature, CW.  
2. Test condition: temperature variation ±2℃, CW.  
Ordering information:  
Type  
Output Power  
GFF  
Connector  
ASE-C  
M=Module  
D=desk  
10=10dBm  
13=13dBm  
G=GFF  
FC/UPC  
FC/APC  
N=Without GFF  
etc  
Installation of Module:  
mar  
k
et@acfiber.com  
www.acfiber.com  
www.acfiber.com  
NO. 1 Service NO.1 Quality  
Typical Spectrum:  
mar  
k
et@acfiber.com  
www.acfiber.com  
            market@acfiber.com